France the switching frequency of the AC-DC switching power supply module?(4)

Ring current backup
The ring current generator is mainly used in the telephone exchange exchange to provide ringing to the telephone users, and is generally used in a biased state. Bias can be divided into positive bias and negative bias. In order to improve the reliability of the ring current system, the ring current needs to be backed up. Installation and maintenance of module power supply
Since the types, series and specifications of the modular power supplies produced by various companies are difficult to count, their functional characteristics and physical characteristics are not the same, so they are also different in installation, use and maintenance, but the following aspects should be paid attention to

When testing electronic and electrical equipment, the electronic and electrical equipment shall be tested for conducted interference voltage emission at its Marine boost/buck voltage power supply terminal. Although the test frequency bands of different standards are different, the test frequency bands of most products are 150K~30M. It can be seen from the lower limit of the test frequency that the operating frequency of the switching Marine boost/buck voltage power supply is close to 150K, and the more difficult it is to deal with the conducted disturbance.

3. What special applications are required for the power switching frequency?

In some special cases, the circuit operation is more sensitive to the switching noise of the Marine boost/buck voltage power supply. Such as power carrier, wireless communication, wireless identification, etc. The Marine boost/buck voltage power supply requirements for power carrier applications are as follows.

At present, the power carrier is mainly used for intelligent carrier in the home, remote meter reading system, and remote street lamp control system. The use range of the carrier frequency of power lines in my country is 9KHz ~ 500KHz, and the carrier bandwidth is 4KHz. The development of power carrier is very limited due to the change of power line impedance and the interference of power line noise. In order to increase the communication distance of the power carrier, we must move away from the power switching frequency of the circuit carrier unit. The carrier frequencies currently used in China are 115KHz and 132KHz. In this case, the switching frequency is around 60KHz for the Marine boost/buck voltage power supply.