(6) For the module power supply, some manufacturers have a fixed resistance directly connected to the adjustable terminal (ADJ) from the factory. When

(3) Before the installation is completed and the power is turned on, the wiring on each terminal should be checked and checked again to ensure that th

Electrolytic capacitors, aluminum electrolytic capacitors and monolithic gallbladders, which use sulfuric acid to make the insulating medium, large ca

rectangular wave of 20 kHz.Due to the poor working conditions of the welding machine power supply and frequent short-circuit, arcing and open-circuit

Polyurethane has been used in China for a period of time, but due to its high hardness, inconvenient maintenance, and the price reduction of silicone

(9) For the high-voltage module power supply, do not touch the high-voltage dangerous area during use and within 10 minutes after the power outage.(10

The quality of the resolution of the circuit schematic is usually done from a professional perspective. This power module can be divided into two kind

The core of the Marine boost/buck voltage power supply is the IC, just like the brain of the Marine boost/buck voltage power supply, the quality of

(1) It has a particularly wide range of uses, not only aerospace, post and telecommunications, but also metallurgy, mining, automatic control, etc., w

Regulation of output voltageFor module power products with TRIM or ADJ (adjustable) output pins, the output voltage can be adjusted within a certain r

For the ADJ output pin, it is divided into input side adjustment and output side adjustment. The output side is adjusted in the same way as the TRIM p

There are three elements in the procurement of DC conversion power supply, Ukraine and the noise should not be too largeIn order to improve the work