What is the role of the the 110 v input power supply?(2)

reasonable core structure and compact structure.
At the same time, in order to reduce the size of the module switching power supply, the switching frequency of the module switching power supply should be increased as much as possible. If it is to be increased to about 500kHz or higher, the loss of the ordinary magnetic core material is very large, and the magnetic core is easily overheated and magnetically saturated, and even It cannot work normally, so the high-frequency magnetic core material with excellent magnetic properties must be selected in the module switching power supply.

For the TRIM output pin, the center of the output potentiometer and the center TRIM are all connected to +S, -S in the pin module, and the other two ends are connected to +S, -S respectively. There is no +S, and the -S ends receive the positive and negative outputs of the corresponding main circuit respectively (+S is connected to +Vin, -S is connected to -Vin), and then adjust the potentiometer. The resistance of the potentiometer is generally 5~10kΩ.

the 110 v input 48V input power supply The ADJ output pins are divided into input adjustment and output adjustment. Output trim and output trim. The adjustment method of the TRIM pin is the same. When one end of the potentiometer is connected to the center, the output voltage can only increase the output voltage, and the other end is connected to the ground of the input.

Input protection circuit General DCDC conversion module 48V input power supply supply products use built-in filters, which can meet the requirements of general 48V input power supply applications. If a more demanding power system is required, the 110 v input 48V input power supply the input filter network should be added. Either LC or π can be used but care should be taken to choose a smaller inductance and larger capacitance.