What is the role of the custom-make?(3)

Input protection circuit General 24 v Marine boost power supply supply products use built-in filters, which can meet the requirements of general Marine boost power supply applications. If a more demanding power system is required, custom-make the input filter network should be added. Either LC or π can be used but care should be taken to choose a smaller inductance and larger capacitance.

(6) For the module power supply, some manufacturers have a fixed resistance directly connected to the adjustable terminal (ADJ) from the factory. When using, the user must configure a potentiometer with the corresponding resistance value to replace the fixed resistance. However, it should be noted that when the adjustable terminals are in an open state, loading is never allowed.
(7) In order to achieve sufficient heat dissipation, the module power supply should be installed in a location with better air convection. Generally, when the working current of the linear power supply is above 4A, or the working current of the switching power supply is above 7A, forced air cooling should be installed. In addition, no other items are allowed on the module power supply housing.
(8) The module power supply is generally suitable for resistive-based loads. If it needs to be applied to capacitive-based or inductive-based loads, it should be explained in the order contract in advance and customized by the manufacturer.

In order to prevent the transient high voltage damage of the 24 v Marine boost power supply supply, it is recommended that the user connect the transient absorption diode to the input terminal, and cooperate with the fuse to ensure that the module is within the safe input voltage range. In order to reduce the common mode noise, Y (Cy) can be increased and several capacitors nf high frequency capacitors are generally selected. R is a fuse, D is a protection diode, and D is a transient absorption diode (P6KE series).