What kind of 主词六替换 will be higher(4)
Electrolytic capacitors, aluminum electrolytic capacitors and monolithic gallbladders, which use sulfuric acid to make the insulating medium, large capacity can carry out smaller volumes for the above, and are marked with a + sign, some are marked with a mark, generally do low cross-linking and side-by-side Circuit filter with larger loss meson, integral aluminum electrolytic capacitor, due to the shortcomings of using special materials, the electrolytic performance is better than ordinary, the preferred frequency, but can not do too much capacity, it can be used to accurately circuits, such as oscillators, or timing circuits.
high frequency switch
The rapid development of the communication industry has greatly promoted the development of communication power. High frequency miniaturized switching power supply and its technology have become the mainstream of modern communication power supply system. In the field of communication, the rectifier is usually called the primary power supply, and the direct current-direct current (DC/DC) converter is called the secondary power supply. The role of the primary power supply is to convert the single-phase or three-phase AC power grid into a DC power supply with a nominal value of 48V. In the primary power supply for program-controlled switches, the traditional phase-controlled regulated power supply has been replaced by a high-frequency switching power supply. Controlled in the 50-100kHz range for high efficiency and miniaturization. In recent years, the power capacity of switching rectifiers has been continuously expanded, and the single-unit capacity has been expanded from 48V/12.5A, 48V/20A to 48V/200A, 48V/400A.
主词六替换Five: aging and batch test high temperature aging test
No matter how good the material and production technology process control of the product is, it is necessary to detect the aging of the equipment. Because the incoming inspection of electronic components and transformers is difficult to control, only by improving the aging and high-temperature sampling of the entire batch of power supplies can we detect whether the quality stability and material management of this batch of power supplies have potential safety risks.