East Timor There are three elements in the procurement of DCDC converter(3)

Regulation of output voltage
For module power products with TRIM or ADJ (adjustable) output pins, the output voltage can be adjusted within a certain range through resistors or potentiometers, and the general adjustment range is ±10%.
For the TRIM output pin, connect the center of the potentiometer to TRIM. In all modules with +S and -S pins, the other two ends are connected to +S and -S respectively. When there is no +S, -S, connect the two ends to the output positive and negative poles of the corresponding main circuit (+S to +Vin, -S to -Vin), and then adjust the potentiometer. The resistance value of the potentiometer is generally more appropriate to use 5 ~ 10kΩ.

The high-voltage power module will generate a very high voltage during operation. If someone touches it, the consequences are unimaginable. In order to ensure the safety of employees and avoid safety risks, it is necessary to understand the insulation when purchasing high-voltage power supplies. Only by ensuring that the insulation is good enough, can some unnecessary troubles be avoided.

3. Make sure the Marine boost power supply has multiple certifications.

Unlike other parts, there are many certifications for high-quality power modules, such as ISO9001.CE.RoHS is the certification required for power modules, we choose never to suffer from this, because everything can be fraudulent, qualifications cannot be fraudulent .

In short, the high-voltage Marine boost power supply module must pay attention to the above three elements, and only by paying attention to these problems will not suffer losses, otherwise it may lead to safety risks.