Laos acdc power module potting requirements(1)

The potting of the acdc power module is very important. This process not only involves the protection of the power module potting acdc power module (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also involves the protection of the power module. thermal design.

high frequency switch
The rapid development of the communication industry has greatly promoted the development of communication power. High frequency miniaturized switching power supply and its technology have become the mainstream of modern communication power supply system. In the field of communication, the rectifier is usually called the primary power supply, and the direct current-direct current (DC/DC) converter is called the secondary power supply. The role of the primary power supply is to convert the single-phase or three-phase AC power grid into a DC power supply with a nominal value of 48V. In the primary power supply for program-controlled switches, the traditional phase-controlled regulated power supply has been replaced by a high-frequency switching power supply. Controlled in the 50-100kHz range for high efficiency and miniaturization. In recent years, the power capacity of switching rectifiers has been continuously expanded, and the single-unit capacity has been expanded from 48V/12.5A, 48V/20A to 48V/200A, 48V/400A.

Commonly used power module potting materials are divided into three categories: epoxy resin, polyurethane and silicone rubber

Epoxies cannot be used for stress-sensitive and module sealing due to their hardness and are basically eliminated by module power supplies. However, due to its low cost, this epoxy is still used in cost-sensitive micropower supplies. Some domestic bad 24V input power supply manufacturers also use this epoxy resin acdc 24V input power supply module. However, due to stress problems, the failure rate of this 24V input power supply is very high, and buyers are miserable.