Nepal the switching frequency of the AC-DC switching power supply module?(4)
When testing electronic and electrical equipment, the electronic and electrical equipment shall be tested for conducted interference voltage emission at its Marine boost/buck voltage power supply terminal. Although the test frequency bands of different standards are different, the test frequency bands of most products are 150K~30M. It can be seen from the lower limit of the test frequency that the operating frequency of the switching Marine boost/buck voltage power supply is close to 150K, and the more difficult it is to deal with the conducted disturbance.
3. What special applications are required for the power switching frequency?
In some special cases, the circuit operation is more sensitive to the switching noise of the Marine boost/buck voltage power supply. Such as power carrier, wireless communication, wireless identification, etc. The Marine boost/buck voltage power supply requirements for power carrier applications are as follows.
●The design is simple. Power is available with just one power module, with a few discrete components. ● Shorten the development cycle. The module power supply generally has a variety of input and output options. Users can also repeatedly stack or cross stack to form a building block combined power supply to achieve multiple input and output, which greatly reduces the prototype development time.
●Change is flexible. If the product design needs to be changed, simply convert or parallel another suitable power module.
At present, the power carrier is mainly used for intelligent carrier in the home, remote meter reading system, and remote street lamp control system. The use range of the carrier frequency of power lines in my country is 9KHz ~ 500KHz, and the carrier bandwidth is 4KHz. The development of power carrier is very limited due to the change of power line impedance and the interference of power line noise. In order to increase the communication distance of the power carrier, we must move away from the power switching frequency of the circuit carrier unit. The carrier frequencies currently used in China are 115KHz and 132KHz. In this case, the switching frequency is around 60KHz for the Marine boost/buck voltage power supply.