Welcome to Nanjing Pengtu Power Supply Co. Ltd.

Costa Rica the switching frequency of the AC-DC switching power supply module?(4)

2022-10-16

When testing electronic and electrical equipment, the electronic and electrical equipment shall be tested for conducted interference voltage emission at its 24V input power supply terminal. Although the test frequency bands of different standards are different, the test frequency bands of most products are 150K~30M. It can be seen from the lower limit of the test frequency that the operating frequency of the switching 24V input power supply is close to 150K, and the more difficult it is to deal with the conducted disturbance.

3. What special applications are required for the power switching frequency?

Drive module power supply
The frequency converter power supply is mainly used for the frequency conversion and speed regulation of the AC motor. The main circuit of the inverter power supply adopts the AC-DC-AC scheme. The power frequency power supply becomes a fixed DC voltage through a rectifier, and then a PWM high-frequency converter composed of high-power transistors or IGBTs inverts the DC voltage into an AC output with variable voltage and frequency. The output waveform of the power supply is similar to a sine wave. It is used to drive the AC asynchronous motor to realize stepless speed regulation.

In some special cases, the circuit operation is more sensitive to the switching noise of the 24V input power supply. Such as power carrier, wireless communication, wireless identification, etc. The 24V input power supply requirements for power carrier applications are as follows.

power module

At present, the power carrier is mainly used for intelligent carrier in the home, remote meter reading system, and remote street lamp control system. The use range of the carrier frequency of power lines in my country is 9KHz ~ 500KHz, and the carrier bandwidth is 4KHz. The development of power carrier is very limited due to the change of power line impedance and the interference of power line noise. In order to increase the communication distance of the power carrier, we must move away from the power switching frequency of the circuit carrier unit. The carrier frequencies currently used in China are 115KHz and 132KHz. In this case, the switching frequency is around 60KHz for the 24V input power supply.