How to install the Switzerland AC power supply so that it can function as a protection switch?(3)
Remote control switch circuit
The remote control switch operation of the module power supply is carried out through the REM terminal. There are two general control methods:
(1) REM is connected to -VIN (reference ground), the remote control is turned off, and VREF<0.4V is required. REM is suspended or connected to +VIN, the module works, and VREM>1V is required.
(2) REM is connected to VIN, the remote control is turned off, and VREM<0.4V is required. REM is connected to +VIN, the module works, VREM>1V is required. REM is suspended, and the remote control is turned off, that is, the so-called "suspended shutdown" (-R).
If the control is to be isolated from the input, an optocoupler can be used to pass the control signal
The three-phase AC power intelligent protector has developed and created the function of "fault detection before closing", which has greatly improved its performance and reliability. The three-phase AC power intelligent protector detects the 48V input power supply voltage, the reverse connection of the neutral line, the disconnection of the neutral line, and the lack of phase/phase failure through the single-chip microcomputer before the main switch is closed.
During operation, it can track and detect the Switzerland 48V input power supply voltage, neutral line disconnection, phase loss / disconnection, etc., and cut off the 48V input power supply in time when a fault occurs, making it safer and safer to use electricity. More reliable; at the same time, through a set of attached indicator lights, it shows the fault situation, which provides convenience for line maintenance.
Switzerland It can be widely used in electrical equipment protection stations, meteorological telemetry stations, energy pipeline telemetry stations, petroleum Exploration, automatic pumping and other places.