Welcome to Nanjing Pengtu Power Supply Co. Ltd.

Lithuania acdc power module potting requirements(1)

2022-10-04

AC-DC power module

The potting of the acdc power module is very important. This process not only involves the protection of the power module potting acdc power module (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also involves the protection of the power module. thermal design.

Commonly used power module potting materials are divided into three categories: epoxy resin, polyurethane and silicone rubber

module combination
(1) Parallel expansion. Connecting the output terminals of the same module in parallel can enhance the output capability, but the output voltage of the parallel modules should be adjusted to be consistent to ensure relative current sharing and avoid unnecessary oscillations. For modules with large current output, the lead resistance can also be carefully designed to achieve the effect of current sharing. The number of modules connected in parallel in this way should not exceed 2. At the same time, if one of the module outputs is faulty, the entire system will not work properly. The parallel expansion connection circuit RL is the load.

Epoxies cannot be used for stress-sensitive and module sealing due to their hardness and are basically eliminated by module power supplies. However, due to its low cost, this epoxy is still used in cost-sensitive micropower supplies. Some domestic bad 48V input power supply manufacturers also use this epoxy resin acdc 48V input power supply module. However, due to stress problems, the failure rate of this 48V input power supply is very high, and buyers are miserable.