Czecho the switching frequency of the AC-DC switching power supply module?(5)

module combination
(1) Parallel expansion. Connecting the output terminals of the same module in parallel can enhance the output capability, but the output voltage of the parallel modules should be adjusted to be consistent to ensure relative current sharing and avoid unnecessary oscillations. For modules with large current output, the lead resistance can also be carefully designed to achieve the effect of current sharing. The number of modules connected in parallel in this way should not exceed 2. At the same time, if one of the module outputs is faulty, the entire system will not work properly. The parallel expansion connection circuit RL is the load.

At present, the power carrier is mainly used for intelligent carrier in the home, remote meter reading system, and remote street lamp control system. The use range of the carrier frequency of power lines in my country is 9KHz ~ 500KHz, and the carrier bandwidth is 4KHz. The development of power carrier is very limited due to the change of power line impedance and the interference of power line noise. In order to increase the communication distance of the power carrier, we must move away from the power switching frequency of the circuit carrier unit. The carrier frequencies currently used in China are 115KHz and 132KHz. In this case, the switching frequency is around 60KHz for the 24V input power supply.