Japan the switching frequency of the AC-DC switching power supply module?(5)

(2) Parallel connection of redundant hot backup. Connecting the output terminals of the same module through diodes in parallel can enhance the output capability and improve the reliability of the power supply system. In principle, if it cooperates with the corresponding output alarm circuit, put the module on the busbar that can be removed, so that the faulty module can be replaced in time. There is no limit to the number of modules connected in parallel in this way. D is generally a Schottky diode.
(3) Series expansion. Connecting the output terminals of the same module in series can double the output voltage and increase the power accordingly, and the series output terminals must be connected with diodes for protection.

At present, the power carrier is mainly used for intelligent carrier in the home, remote meter reading system, and remote street lamp control system. The use range of the carrier frequency of power lines in my country is 9KHz ~ 500KHz, and the carrier bandwidth is 4KHz. The development of power carrier is very limited due to the change of power line impedance and the interference of power line noise. In order to increase the communication distance of the power carrier, we must move away from the power switching frequency of the circuit carrier unit. The carrier frequencies currently used in China are 115KHz and 132KHz. In this case, the switching frequency is around 60KHz for the Marine boost/buck voltage power supply.