Yemen acdc power module potting requirements(1)

The potting of the acdc power module is very important. This process not only involves the protection of the power module potting acdc power module (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also involves the protection of the power module. thermal design.

Diode loss
Diode rectification is used in traditional rectification, and Schottky diode rectification is generally used under low voltage output conditions. Compared with other rectifier diodes, Schottky diodes have the advantages of faster switching speed and lower forward voltage, but Schottky diodes The forward voltage drop of the diode is related to the size of the rectified output current. The larger the rectified output current is, the greater the forward voltage drop, which may be as high as 0.5~0.6V or more, and the reverse leakage current of the Schottky diode is larger. .

Commonly used power module potting materials are divided into three categories: epoxy resin, polyurethane and silicone rubber

Epoxies cannot be used for stress-sensitive and module sealing due to their hardness and are basically eliminated by module power supplies. However, due to its low cost, this epoxy is still used in cost-sensitive micropower supplies. Some domestic bad Marine boost/buck voltage power supply manufacturers also use this epoxy resin acdc Marine boost/buck voltage power supply module. However, due to stress problems, the failure rate of this Marine boost/buck voltage power supply is very high, and buyers are miserable.