France the switching frequency of the AC-DC switching power supply module?(5)

(3) Before the installation is completed and the power is turned on, the wiring on each terminal should be checked and checked again to ensure that the input and output, AC and DC, single-phase and multi-phase, positive and negative, voltage and current values are correct. Prevent the occurrence of reverse and wrong connections.
(4) For high-power power supplies, there are generally two or more "+" output terminals and "-" output terminals. In fact, they belong to the same output electrode, but for the convenience of user wiring, they are connected together internally.
(5) The module power supply is not allowed to work at full load for a long time. The utilization rate of linear power supply should be controlled within 60%; the utilization rate of switching power supply should be controlled within 80%, otherwise it may cause early artificial failure of module power supply.

At present, the power carrier is mainly used for intelligent carrier in the home, remote meter reading system, and remote street lamp control system. The use range of the carrier frequency of power lines in my country is 9KHz ~ 500KHz, and the carrier bandwidth is 4KHz. The development of power carrier is very limited due to the change of power line impedance and the interference of power line noise. In order to increase the communication distance of the power carrier, we must move away from the power switching frequency of the circuit carrier unit. The carrier frequencies currently used in China are 115KHz and 132KHz. In this case, the switching frequency is around 60KHz for the LED advertising screen power supply.