What kind of 主词六替换 will be higher(2)

The quality of the resolution of the circuit schematic is usually done from a professional perspective. This power module can be divided into two kinds of bare board and packaged, according to an intuitive way of bare board, such as electronic components layout is reasonable and orderly, generous, orderly, and the net pad is lit upright. Also, stationary modules will not be able to see what's going on inside, but it's much better not to be exposed due to safety and performance levels. The soldering process can include both wave soldering and manual soldering, and the quality of the mechanized production process of wave soldering is superior to that of manual soldering.

Two: the components of the chip

(6) For the module power supply, some manufacturers have a fixed resistance directly connected to the adjustable terminal (ADJ) from the factory. When using, the user must configure a potentiometer with the corresponding resistance value to replace the fixed resistance. However, it should be noted that when the adjustable terminals are in an open state, loading is never allowed.
(7) In order to achieve sufficient heat dissipation, the module power supply should be installed in a location with better air convection. Generally, when the working current of the linear power supply is above 4A, or the working current of the switching power supply is above 7A, forced air cooling should be installed. In addition, no other items are allowed on the module power supply housing.
(8) The module power supply is generally suitable for resistive-based loads. If it needs to be applied to capacitive-based or inductive-based loads, it should be explained in the order contract in advance and customized by the manufacturer.

The core problem of the 24V input power supply is the IC, which is like the brain of the 24V input power supply. The quality of the IC can directly affect the various working parameters of the 24V input power supply.