Spain the switching frequency of the AC-DC switching power supply module?(3)

We know that the lower the switching frequency, the smaller the switching loss, but on the other hand, with the reduction of the switching frequency, the volume of the Marine boost voltage power supply equipment will be reduced to the maximum, which is not conducive to miniaturization. When the switching Marine boost voltage power supply is working, due to the switching of the switching device, the magnetic core will vibrate, and the frequency range that the human ear can hear is about 20~20000Hz. In order to avoid audible noise, we usually choose to stay away from the 20 frequency KHz.

Inverter module power supply
High frequency inverter rectifier welding machine power supply is a new type of welding machine power supply with high performance, high efficiency and material saving, which represents the development direction of current welding machine power supply. Due to the commercialization of IGBT large-capacity modules, this power supply has a broader application prospect.
Most of the inverter welding machine power supply adopts the method of AC-DC-AC-DC (AC-DC-AC-DC) conversion. The 50Hz alternating current is converted into direct current by full-bridge rectification, and the PWM high-frequency conversion part composed of IGBT inverts the direct current into a high-frequency

2. Spain Disadvantages of choosing an AC-DC control IC with a switching frequency higher than 135K

When testing electronic and electrical equipment, the electronic and electrical equipment shall be tested for conducted interference voltage emission at its Marine boost voltage power supply terminal. Although the test frequency bands of different standards are different, the test frequency bands of most products are 150K~30M. It can be seen from the lower limit of the test frequency that the operating frequency of the switching Marine boost voltage power supply is close to 150K, and the more difficult it is to deal with the conducted disturbance.