How to install the Sweden AC power supply so that it can function as a protection switch?(3)

Regulation of output voltage
For module power products with TRIM or ADJ (adjustable) output pins, the output voltage can be adjusted within a certain range through resistors or potentiometers, and the general adjustment range is ±10%.
For the TRIM output pin, connect the center of the potentiometer to TRIM. In all modules with +S and -S pins, the other two ends are connected to +S and -S respectively. When there is no +S, -S, connect the two ends to the output positive and negative poles of the corresponding main circuit (+S to +Vin, -S to -Vin), and then adjust the potentiometer. The resistance value of the potentiometer is generally more appropriate to use 5 ~ 10kΩ.

The three-phase AC power intelligent protector has developed and created the function of "fault detection before closing", which has greatly improved its performance and reliability. The three-phase AC power intelligent protector detects the Marine boost/buck voltage power supply voltage, the reverse connection of the neutral line, the disconnection of the neutral line, and the lack of phase/phase failure through the single-chip microcomputer before the main switch is closed.

During operation, it can track and detect the Sweden   Marine boost/buck voltage power supply voltage, neutral line disconnection, phase loss / disconnection, etc., and cut off the Marine boost/buck voltage power supply in time when a fault occurs, making it safer and safer to use electricity. More reliable; at the same time, through a set of attached indicator lights, it shows the fault situation, which provides convenience for line maintenance.

Sweden It can be widely used in electrical equipment protection stations, meteorological telemetry stations, energy pipeline telemetry stations, petroleum Exploration, automatic pumping and other places.