What does a DCDC converter look like?(2)

DCDC converter The distinction between good circuit principles and bad circuit principles can often only be made from a professional perspective. At this stage, power modules can be roughly divided into two types: bare board and potting. The bare board can be based on intuitive methods, such as the layout of electronic components is reasonable, neat, generous, neat, and the solder joints are bright and straight. For encapsulated modules, it is not possible to see the internal conditions, but since the internal conditions are not exposed, it is much better in terms of safety and performance metrics. The soldering process can include hand soldering and wave soldering. The quality of the wave soldering process of mechanized production is better than that of manual soldering.

DCDC converter Two: chip components

Diode loss
Diode rectification is used in traditional rectification, and Schottky diode rectification is generally used under low voltage output conditions. Compared with other rectifier diodes, Schottky diodes have the advantages of faster switching speed and lower forward voltage, but Schottky diodes The forward voltage drop of the diode is related to the size of the rectified output current. The larger the rectified output current is, the greater the forward voltage drop, which may be as high as 0.5~0.6V or more, and the reverse leakage current of the Schottky diode is larger. .

The core of the Marine boost/buck voltage power supply is the IC, just like the brain of the Marine boost/buck voltage power supply, the quality of the IC directly affects various parameters of the Marine boost/buck voltage power supply.