Kazakhstan acdc power module potting requirements(1)
The potting of the acdc power module is very important. This process not only involves the protection of the power module potting acdc power module (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also involves the protection of the power module. thermal design.
The synchronous rectification technology uses field effect transistors (MOSFETs) with small on-resistance and low withstand voltage to replace ordinary rectifier diodes. Since the synchronous rectifier MOSFET has the characteristics of low on-resistance (generally only a few mΩ), small leakage current when blocking, and high switching operating frequency, it can greatly reduce the power consumption of the power rectifier part and make the working efficiency of the power system obvious. It is improved, but the realization of synchronous rectification is more complicated than diode rectification in specific applications. In the application of low voltage and high current output of switching power supply, synchronous rectification technology has a good application prospect.
Commonly used power module potting materials are divided into three categories: epoxy resin, polyurethane and silicone rubber
Epoxies cannot be used for stress-sensitive and module sealing due to their hardness and are basically eliminated by module power supplies. However, due to its low cost, this epoxy is still used in cost-sensitive micropower supplies. Some domestic bad Marine boost/buck voltage power supply manufacturers also use this epoxy resin acdc Marine boost/buck voltage power supply module. However, due to stress problems, the failure rate of this Marine boost/buck voltage power supply is very high, and buyers are miserable.