Welcome to Nanjing Pengtu Power Supply Co. Ltd.

Slovenia the switching frequency of the AC-DC switching power supply module?(3)


AC-DC power module

We know that the lower the switching frequency, the smaller the switching loss, but on the other hand, with the reduction of the switching frequency, the volume of the Marine boost voltage power supply equipment will be reduced to the maximum, which is not conducive to miniaturization. When the switching Marine boost voltage power supply is working, due to the switching of the switching device, the magnetic core will vibrate, and the frequency range that the human ear can hear is about 20~20000Hz. In order to avoid audible noise, we usually choose to stay away from the 20 frequency KHz.

Drive module power supply
The frequency converter power supply is mainly used for the frequency conversion and speed regulation of the AC motor. The main circuit of the inverter power supply adopts the AC-DC-AC scheme. The power frequency power supply becomes a fixed DC voltage through a rectifier, and then a PWM high-frequency converter composed of high-power transistors or IGBTs inverts the DC voltage into an AC output with variable voltage and frequency. The output waveform of the power supply is similar to a sine wave. It is used to drive the AC asynchronous motor to realize stepless speed regulation.

2. Slovenia Disadvantages of choosing an AC-DC control IC with a switching frequency higher than 135K

When testing electronic and electrical equipment, the electronic and electrical equipment shall be tested for conducted interference voltage emission at its Marine boost voltage power supply terminal. Although the test frequency bands of different standards are different, the test frequency bands of most products are 150K~30M. It can be seen from the lower limit of the test frequency that the operating frequency of the switching Marine boost voltage power supply is close to 150K, and the more difficult it is to deal with the conducted disturbance.