How to install the Qatar AC power supply so that it can function as a protection switch?(1)

Regulation of output voltage
For module power products with TRIM or ADJ (adjustable) output pins, the output voltage can be adjusted within a certain range through resistors or potentiometers, and the general adjustment range is ±10%.
For the TRIM output pin, connect the center of the potentiometer to TRIM. In all modules with +S and -S pins, the other two ends are connected to +S and -S respectively. When there is no +S, -S, connect the two ends to the output positive and negative poles of the corresponding main circuit (+S to +Vin, -S to -Vin), and then adjust the potentiometer. The resistance value of the potentiometer is generally more appropriate to use 5 ~ 10kΩ.

How to install the Qatar AC Marine boost voltage power supply so that it can function as a protection switch?

Since the air switch and the leakage switch do not have protective functions, when the Marine boost voltage power supply is abnormal, a large number of electrical equipment will be damaged. When these accidents occur, it is only necessary to disconnect the Marine boost voltage power supply when the Marine boost voltage power supply is abnormal, so as not to damage the electrical equipment.

Qatar The three-phase AC power intelligent protector has major electrical fault protection functions such as overvoltage, low voltage, neutral wire disconnection, short circuit, phase loss/opening, etc., and has fault identification, fault indication, voltage before closing, neutral live wire reverse connection, Zero line disconnection, phase loss/phase failure detection, remote monitoring, online parameter modification and software upgrade functions.